Higher purity alloys are always preferred for anodizing. Alloying elements such as copper and silicon do not anodize and leave microscopic voids in the aluminum oxide film. Since the anodizing process converts only the aluminum to aluminum oxide to form the anodized finish, higher purity aluminum will yield a denser and harder layer of aluminum oxide. High concentrations of some alloying elements will also affect the surface finish and color of the anodized finish and will reduce the effectiveness of the sealing process causing reduced corrosion and wear resistance and decreasing fade resistance in dyed parts.
The most popular alloys used for anodizing are 5000, 6000 and 7000 series alloys. These alloys will provide consistently excellent quality finishes for hardcoat and conventional anodizing. High purity alloys like 1100 and 3000 series will also form very good finishes. Although 2000 series alloys are popular alloys because of their strength and machining characteristics they are not the best choice for good anodized finishes due to high copper content. If your requirements are highly cosmetic we do not recommend 2000 series alloys. It has all of the disadvantages noted in the above paragraph. A superior anodized finish will be obtained with higher purity alloys.